eMotion LV1 Knowledge Base – Discover the latest technical and support information plus helpful resources for configuring and working with your eMotion LV1 Setup
Learn about various aspects and find guidelines for building your SoundGrid system. There are several factors that need to be considered, here we break them down and discuss them in depth, and provide an overview of the system as a whole.
Follow these important steps to install SoundGrid applications such as eMotion LV1, SuperRack, SoundGrid Studio, SoundGrid QRec and the SoundGrid Driver on M1 (ARM based) Mac computers.
Learn how to easily set up the MyMon on-stage monitor mix controller application on iOS and Android devices, and sync with the eMotion LV1 mixer and SoundGrid Studio.
When building or purchasing a computer dedicated to hosting the Waves eMotion LV1 live mixer, follow the specifications and guidelines below.
This page will guide you through setting up your Windows for hosting SoundGrid applications, driver and networks.
Consult this page for up-to-date information on Thunderbolt to Ethernet Adapters for SoundGrid networking on Mac computers.
Learn how to add a separate computer to your SoundGrid network for recording and playback purposes. This article assumes you already have a supported and functional SoundGrid network.
Get familiar with useful keyboard shortcuts for the eMotion LV1 Mixer. Use these to control global, mixer, rack, channel and plugin parameters and selections.
This article presents recommendations to try if you are experiencing audio issues when recording/playing back audio from an Apple Silicon Mac to your SoundGrid network.
Learn how to update the Hear Technologies WSG Bridge for Dante firmware in order to run it with SoundGrid applications V13 and above.
Netgear M4250 & M4300 series network switches offer a profile for SoundGrid networks that is officially supported and recommended. Follow the instructions below to configure the profile accordingly.
SoundGrid is an exclusive network. Mixing SoundGrid with other types of traffic on the same network can result in audio drops or other problems. Refer to this article for guidelines about using a SoundGrid network in a Virtual LAN (VLAN).
Learn how to share Soundgrid IO’s and between two eMotion LV1 systems. This enables you to ‘pick up’ the device’s inputs on two systems and control them separately. This feature is available in eMotion LV1 V11 and up.
Learn how to set up Reaper with Waves SoundGrid ASIO/Core Audio Driver and route audio to record or playback multiple tracks from or to your SoundGrid system. Session templates are included for download.
If you encounter an “Application failed to initialize” message in a Waves host application, follow the instructions described in this article.
These instructions will guide you through the process of connecting your Combo hardware and installing the latest software updates.
We have collected a list of common issues surrounding the topic of audio drops in a SoundGrid system: what to look for and what to avoid.
This page summarizes key improvements and main issues solved in the latest version of the eMotion LV1 live mixer. It also presents existing issues, some with workarounds, that we are working to solve.
Learn how to calibrate touch screens on Windows computers for use with Soundgrid applications such as eMotion LV1, SuperRack and SoundGrid Studio.
All SoundGrid applications and driver require selecting a SoundGrid network port. Some systems will display a list of available network ports; follow these steps to identify the correct port.
Here are basic ground rules for powering your SoundGrid Setup on and off in a controlled manner.
If you cannot find Waves plugins in eMotion LV1, SuperRack, or SoundGrid Studio, follow these instructions to make them available.
If you are trying to use your SoundGrid server in a Waves host but the server appears as N/A in the inventory, follow these steps.
If you are trying to use your SoundGrid server in a Waves host application but the server does not appear in the inventory, follow these steps.
All SoundGrid Interface drivers are now pre-installed with each SoundGrid application. If you see this message, reinstall your SoundGrid application or the specific device driver via Waves Central's 'All Products' tab.
To display V10 or V11 SuperRack, eMotion LV1, SoundGrid Studio in full screen on HD & UHD (4K) resolution display monitors on Windows 10, either update to V12.8 which supports auto-scaling, or follow these steps:
When setting up redundant SoundGrid servers with your live console system, there are a few ways to ensure optimal performance so you can be ready for anything that may occur during a live show.
Learn how to update your eMotion LV1, SuperRack and SoundGrid Studio licenses and software to the latest Version.
To load sessions created in eMotion LV1 v12 (and up) in eMotion LV1 v11, please follow these steps:
If you are running eMotion LV1 on an Axis One or Proton computer, or any other computer with Intel® UHD Graphics card, and experience a GUI flicker when moving to full screen, follow these steps to update the driver version.
With the release of the eMotion LV1 12.8 software update, a new version of the MyMon app is available for download on the App Store and Google Play. To prevent a version mismatch between eMotion LV1 and MyMon, check the guidelines on this page.
This page presents general support notes and known issues, some with workarounds, with Waves computers such as Axis One and Axis Proton. We will update this page on an ongoing basis as issues are solved.
If you run into issues after applying changes to your Axis One or Axis Proton computer, you can undo these changes using the factory enabled Windows restore point instead of spending time troubleshooting the issue.
Follow the steps below to install Waves SoundGrid applications and activate their licenses to your computer in one go, using Waves Central’s “Install Products” page.
When transferring a SoundGrid server from setup to another, a Firmware update may be needed to match firmware and software versions. When transferring a server from a SoundGrid Rack for VENUE V10 setup to a SuperRack setup, use this workaround.
Learn how to update your Waves MidiPlus FIT controller’s firmware, to be HUI/Mackie compatible, in order to use it as your controller for Pro Tools, Logic, Ableton Live and Cubase.
Waves plugins are offered as perpetual licenses, or as a subscription to Waves Creative Access. eMotion LV1 and SuperRack are only sold as perpetual (non-subscription) licenses. This article presents best practices and frequently asked questions ...