How to Set Up MultiRack SoundGrid with DiGiCo SD7 Quantum

Last updated on: 6/19/2019 7:03:22 AM

Follow these instructions to connect DiGiCo SD7 Quantum engines to MultiRack SoundGrid and SoundGrid server/s for audio processing, remote control and mirroring for dual engines, with or without server redundancy.

DiGiCo SD7 Quantum digital mixing consoles have a different back panel layout, ports and connection requirements for SoundGrid networks than the standard SD7 console.
All connections should be done with compatible Ethernet cables at supported lengths.
Let’s take a look at the back panel of one SD7 Quantum engine. We can see a Waves IO network port and two Network switches:
  1. A pair of network ports in the top blue panel marked 1 & 2 – let’s call this the “Blue Switch.”
  2. A pair of network ports in the bottom back panel marked 3 & 4 – lets’ call this the “Black Switch.”

Connecting a single SD7 Quantum engine to MultiRack SoundGrid and one server

Set up a single SD7 Quantum engine with MultiRack SoundGrid and one server:

  1. Connect the following to the Blue Switch:
  2. Connect the host computer running MultiRack SoundGrid to the Black Switch.

Important: The Waves IO and SoundGrid server must be connected to the same switch. Connecting them to different switches may result in audio drops.

Connecting a single SD7 Quantum engine to MultiRack SoundGrid and two redundant servers

Set up a single SD7 Quantum engine with MultiRack SoundGrid and two redundant servers:

  1. Connect the following to an external SoundGrid supported network Switch
    • Waves IO
    • SoundGrid server #1
    • SoundGrid server #2 for redundancy
    • The “Blue Switch” (connect to the external switch)
    • The host computer running MultiRack SoundGrid

Important:

  • The Waves IO and SoundGrid servers must be connected to the same switch. Connecting them to different switches may result in audio drops.
  • We highly recommend that both servers be of the same model and generation.

Connecting dual SD7 Quantum engines to MultiRack SoundGrid and one server per engine

Set up dual (mirrored) SD7 Quantum engines with two MultiRack SoundGrid setups, each with one server:

  1. Mark all your hardware and cables! Associate each server to Engine A or B.
  2. Connect the following to Engine A’s Blue Switch:
  3. Connect the host computer running MultiRack SoundGrid to Engine A’s Black Switch.
  4. Connect the following to Engine B’s Blue Switch:
  5. Connect the host computer running MultiRack SoundGrid to Engine B’s Black Switch.
  6. Set up MultiRack SoundGrid inventory and connections as described in steps 3 and 4 here.
  7. Connect a compatible ethernet cable between Black Switch A and B.
  8. Set up Engine Mirroring as described in step 6 here.

Important: Each engine’s Waves IO and SoundGrid server must be connected to the same switch, per engine. Connecting them to different switches may result in audio drops.

Connecting dual SD7 Quantum engines to MRSG and two servers per engine

Set up dual (mirrored) SD7 Quantum engines with two MultiRack SoundGrid setups, each with two redundant servers:

  1. Mark all your hardware and cables! Associate switches and servers with Engines A or B.
  2. Connect the following to external supported network Switch A:
    • Engine A Waves IO
    • SoundGrid server #1
    • SoundGrid server #2 for redundancy
    • Engine A’s Blue Switch (connect to external switch A)
    • MultiRack SoundGrid Host Computer A
  3. Connect the following to external supported network Switch B:
    • Engine B Waves IO
    • SoundGrid server #3
    • SoundGrid server #4 for redundancy
    • Engine B’s Blue Switch (connect to external switch B)
    • MultiRack SoundGrid Host Computer B
  4. Set up MultiRack SoundGrid inventory and connections as described in steps 3 and 4 here.
  5. Connect a compatible ethernet cable between Black Switch A and B.
  6. Set up Engine Mirroring as described in step 6 here.

Important:

  • The Waves IO and SoundGrid servers must be connected to the same switch, per engine. Connecting them to different switches may result in audio drops.
  • We highly recommend that both servers be of the same model and generation.

Was this article helpful?